Data centres providers are often being asked to do more with less. For providers, there’s a delicate balancing act of protecting uptime while planning for growth and rising demand. At the same time, the power generation behind growth is becoming trickier to manage. 

This problem came up time and again in our conversations at Data Centre World in March. Power availability and data centre resilience kept coming up, with conversations about how to build sites that can respond as demand changes. 

There’s also the wider supply picture to consider. Data centres were designated as part of the UK’s Critical National Infrastructure in 2024. The Government has also proposed changes to how strategic projects, like data centres, work with the electricity network. 

Overall, this tells us that resilience no longer just means preparing for an outage. Now, it’s about making sure your site runs efficiently and is prepared for any number of future changes. 

Why is power resilience becoming even more important for data centres? 

When you’re responsible for the smooth running of a data centre, maintaining reliable power sources is an ongoing challenge. Even a short interruption affects service availability. This can knock on to customer trust and day-to-day operations. 

So how should you approach these combined challenges? Depending on the tier and uptime requirements, you need confidence that the site can handle certain issues. Then, you need to account for changing load demands without putting critical systems at risk. 

That’s why a strong power strategy usually brings several things together: 

• UPS protection  

• Standby generation  

• Maintenance and servicing  

• Realistic load planning. 

Done in isolation, none of these tasks will keep an entire data centre running smoothing. Instead, the full system needs to work together while also allowing for future changes. 

What do grid challenges mean for your site? 

The simple fact is that grid capacity is becoming a bigger part of data centre planning. Workloads and equipment are using more power, while grid constraints are a growing topic. 

These matter whether you’re expanding an existing site or planning a new one. For you, it’s important to look at design choices and the amount of flexibility you need from your own infrastructure. 

What should you think about earlier? 

So, what should you be considering? Asking yourself a few key questions can help narrow down your options: 

• What does our site need today?  

• How might that change over the next few years?  

• Can our standby power support a higher load?  

• Can our UPS setup grow without wasting space?  

These might sound tricky or far-off. But considering them now means long-term resilience can be a part of your design, rather than coming up when it might be too late. 

How backup systems help you stay resilient 

So where do backup systems come into this? Well, simply having a generator on site is not the same as knowing it will perform when you need it to. 

Standby power is an essential part of data centre resilience. But it has to be maintained, tested and kept ready for real operating conditions. Things like fuel condition, batteries, alarms, controls and load testing all contribute to how well your systems will perform. 

That’s why generator servicing and ongoing maintenance are such important tasks. Your backup systems might look good on paper. But if servicing hasn’t been regular or loads have changed, you might be carrying more risk than you realise. 

What sort of things should you check? 

If you’d like to check and futureproof your backup systems, you might think about some or all of the following: 

• Are your current servicing schedules good enough? 

• Does your testing reflect current demand?  

• Are known faults being resolved quickly? 

• Fundamentally, are your backup systems right for the load they may need to support? 

Once you’ve carried out these checks, you can identify areas that may need more help. 

How can modular UPS help? 

UPS solutions protect your critical loads when incoming power is interrupted or unstable. They help bridge the gap before other sources of power generation take over again. 

For a data centre nowadays, there is more than just current demand to consider. Workloads and equipment are always advancing, so your UPS also needs to meet potential future challenges. 

This is where we see many organisations choosing solutions such as modular UPS. You can add enough capacity for current needs and then expand with additional power modules as needed. Modular systems also support redundancy, while making better use of available space. 

The benefits of modular UPS for your business 

Are you wondering if modular UPS might be a good fit? Here are some of the ways they can be of benefit: 

• Add capacity in stages  

• Avoid over-sizing 

• Build in redundancy  

• Use space more efficiently  

• Adapt more easily as demand changes  

…and many others. This additional flexibility can be extremely useful when growth can be fast and power needs are always changing. 

How can you make a stronger power resilience plan? 

Above all, a good resilience plan should work for your site as it is now. It should also help you stay flexible for whatever the future brings. 

The key things to look at are: 

• How much power your site needs now and whether demand changes 

• Whether your UPS setup has room to scale  

• If your equipment is properly serviced and maintained  

• How grid constraints might affect future expansion. 

If you look at these, you’ll be considering your power system as a whole rather than individual parts. This shows that UPS systems, standby generation and maintenance should support one another, keeping the entire site running smoothly. 

 How Dale Power Solutions can help 

Data centres are facing rising demand but also potential grid constraints. The key to success is to plan early. The right systems, properly maintained, can help you stay ready for whatever hurdles you might face next. 

At Dale Power Solutions, our generator maintenance and UPS servicing support helps keep standby systems ready for action. Our commercial UPS range is also a flexible way to scale, helping you meet build space and redundancy while futureproofing your site. 

 

ABOUT DALE POWER SOLUTIONS 

Dale Power Solutions are your one source for all your secure power solution needs – keeping your power in safe hands. 

  We have the unique capability to provide our clients with a complete secure power solution. From a wide range of diesel generators, AC & DC industrial UPS and commercial UPS systems, to bespoke generator sets, UPS, Energy Storage, control system upgrades and gas turbine restoration, repackaging. 

 For further information visit https://www.dalepowersolutions.com/ call +44 (0)330 107 6849 or email hello@dalepowersolutions.com 

Visit the DATACENTRE.ME Directory Listing for Dale Power Solutions here. 

  

***END*** 

Disclaimer:  DATACENTRE.ME may not be held responsible or liable for the content or details within this news article.